Manufacturing A Fiber Optic Based Trainer Module Using The Star Topology Method Using Optical Distribution Point (Odp) And Optical Termination Box (Otb)

Authors

  • Mellya Gusriva Nilna Politeknik Negeri Padang, Indonesia
  • Aprinal Adila Asril Politeknik Negeri Padang, Indonesia
  • Lifwarda Politeknik Negeri Padang, Indonesia

DOI:

https://doi.org/10.62671/jataed.v2i2.63

Keywords:

Optical Fiber, Trainer Module, ODP, OTB, Attenuation

Abstract

Optical fiber is a transmission medium made from glass that is used to transmit information in the form of light. As time goes by, the need for fast telecommunications services in data exchange is increasing. However, there are problems with optical fibers such as high attenuation or connection errors that interfere with performance. In this final project, a trainer module was designed regarding splicing and measuring fiber attenuation to help students understand how to connect optics properly and correctly. This module uses devices such as ODP and OTB which are connected to each other. The research results show that the highest attenuation measured was 20.15 dB, while the lowest attenuation value was 0.29 dB. Attenuation corresponding to the calculated link budget of 1.7605 dB indicates good results, while high attenuation indicates poor quality.

References

Fachrid., Wirda Fitriani., Muslim (2023). “ Rancang Bangun Jaringan Fiber Optik Sebagai Infrastruktur Internet Cepat Dalam Mendukung Aktivitas Digitalisasi UMKM Di Desa Kota Pari” Seminar of Social Sciencess Engineering & Humaniora 2023

H. Octavia, Veronica, V., A. A. Asril., Khairunisa, S (2019). “Perancangan Sistem Pengukuran Redaman Transmisi pada Kabel Optik Single Mode dan Multi Mode Akibat Tekukan dengan Faktor Jari-Jari Menggunakan Alat Ukur OPM dan OTDR” vol. 15, no. 1, pp. 29-30, 2019

Kussoy., Steven Daniel., Julyar Prasetyo., & Slamet Widodo (2021). "Rancang Bangun Alat Trainer Jaringan Kabel Serat Optik Untuk Kompetensi Teknisi Instalasi Fiber Optik Dan Praktikum Fiber Optik." Integrated Lab Journal 9.2: 63-79.

Khomsatun, (2019). "Desain Dan Pembuatan Modul Trainer Sensor Sebagai Alat Bantu Pada Pratikum Pembelajaran Sensor Dan Aktuator"

Mardhatillah, K., A. A. Asril, and Y. Yulindon, “Analisa Rugi-Rugi Sambungan Kabel Drop Core Terhadap Performansi Jaringan Optik Di Gedung G Lantai 3 Politeknik Negeri Padang,” J. Fokus Elektroda …, vol. 07, no. 03, pp. 172–177, 2022.

Octavia, H., Asril, A. A., Veronica, V., & Khairunnisa, S. (2019). Design of a

Transmission Mution Measurement System in Single Mode Cable Index and Multi Step Index Step Optical Models Due to Bending Data Factors with Fingers Using OPM and OTDR Measurement Equipment. Jurnal Ilmiah Poli Rekayasa, 15(1), 27. doi:10.30630/jipr.15.1.135.

P. Maria, A. A. Asri, Y. Yustini, I. L. Rimra, and D. Prayama, “Fiber to The Home (FTTH) Network Design in Analyzing Macro Bending Problems in The Home Cable Installation Segment,” Int. J. Adv. Sci. Comput. Eng., vol. 4, no. 2, pp. 138–154, 2022, doi: 10.30630/ijasce.4.2.90.

R. D. Yuseliani, “Penambahan Optical Distribution Point (ODP) Menggunakan Metode Branching Dalam Rancangan Jaringan Fiber To The Home (FTTH) Di Gedung G Lantai 3 Politeknik Negeri Padang,” J. Ilm. Poli Rekayasa, vol. 17, no. 2, p. 58, 2022, doi: 10.30630/jipr.17.2.236.

Rifa’i, Moch Luqman, and Eppy Yundra. (2021)."Trainer Instalasi Perangkat Pasif Jaringan Fiber Optic Sebagai Media Pembelajaran Teknologi Jaringan Berbasis Luas Di Smk Negeri 1 Gondang."

R. Hafizt, Yustini, A. A. Asril, H. N. Nawi and A. Warman, ""Implementasi dan Perfomansi Jaringan Fiber To The Home dengan Teknologi GPON"," Jurnal Teknologi Elekterika, vol. 18 (2), pp. 53-58, 2021.

Yustini, A. A. Asril, H. Setiawan, P. Maria, and S. Rifka, “Installation and Activation of Fiber To The Home ( FTTH ) Networks and Macrobending Problems in the Feeder Cable Segment,” vol. 3, no. 2, pp. 134–143, 2023.

Yustini, A. A. Asril, H. N. Nawi, R. Hafizt, and A. Warman, “Implementasi dan Perfomansi Jaringan Fiber To The Home dengan Teknologi GPON.,” J. Teknol. Elekterika, vol. 5, no. 2, p. 59, 2021

Zukri, I. M., Amelia, Y., Yustini & Yulindon (2022). "Analisis Pengaruh Penggunaan Passive Splitter pada Optical Ditribution Point (ODP) Terhadap Kinerja Jaringa di Rumah Pelanggan." vol 18, no.1 (2022): 32-37

Downloads

Published

2025-04-11

How to Cite

Manufacturing A Fiber Optic Based Trainer Module Using The Star Topology Method Using Optical Distribution Point (Odp) And Optical Termination Box (Otb). (2025). JATAED: Journal of Appropriate Technology for Agriculture, Environment, and Development, 2(2), 1-7. https://doi.org/10.62671/jataed.v2i2.63

Similar Articles

You may also start an advanced similarity search for this article.